Nortel Networks M760 - Manual (Page 58)

Programmable keys
50
Start
- Press the Modify interactive key and resume programming
as explained above, in order to modify the programming
displayed.
- Press the Start interactive key to resume at the beginning,
in order to program another key.
- Press the End interactive key to exit programming mode.
Reminder: during programming,
- pressing the
red key aborts the setting in progress;
- two keystrokes on the red key terminates
the programming sequence.
End
Identifying programmed keys
There are two paper labels to enable you to mark the names
of correspondents or functions programmed on each group of
10 keys.
1 - Remove the transparent cover over the label, by lifting
the bottom of the label.
2 - Write the name of the programmed correspondent or func-
tion on the label.
3 - Refit the transparent cover in position.
Monday 16 October 09:26 AM
Comm Pick-up Funct. Lang.
Forward
M.Martin
Filter
Assistant
Home
Bank
Taxi
Travel A
Line 1
Line 2
Superv.
Superv.
Labels
Modify