Nortel Networks 5100 - Manual (Page 21)

Establishing the system baseline 21
Use the following table to complete system baselines prior to integration.
Task Reference Comments
CS 1000 software is Release
4.5 or later. To check the CS 1000
software release:
1 Log on to Element
Manager.
2 On the left navigation
pane, select Home.
The Home System View
page appears.
3 In the Call Server section,
the software release is
referred to as Release.
Nortel Symposium Call
Center (NGCC) package
311 is installed. To check that a package is
installed:
1 Connect to the Call Server.
2 Enter LD 22.
3 Enter PRT.
4 Enter PKG <package
number>.
5 The package is loaded
if you do not receive a
“package is restricted”
message.
SIP Gateway and
Converged Desktop
package 406 is installed. To check that a package is
installed:
1 Connect to the Call Server.
2 Enter LD 22.
3 Enter PRT.
4 Enter PKG <package
number>.
5 The package is loaded
if you do not receive a
“package is restricted”
message.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.