Nortel Networks 5100 - Manual (Page 85)

85
NRS configuration
The Network Routing Service (NRS) uses a basic SIP structure for its
configuration, which is applicable for SIP, H.323, and Network Connection
Server (NCS) call completion. This structure is the basis of the single
network dialing/numbering plan.
Before you begin configuration of the NRS, gather the names of all domains
and subdomains.
NRS configuration procedures
The sequence of NRS configuration procedures is as follows:
• "Launching NRS Manager" (page 85)
• "Verifying and adjusting system-wide settings" (page 87)
• "Configuring the NRS server settings (H.323 Gatekeeper or SIP)" (page
89)
• "Configuring the service domain" (page 91)
• "Configuring the L1 domain (UDP)" (page 92)
• "Configuring the L0 domain (CDP)" (page 95)
• "Configuring Gateway endpoints" (page 98)
• "Configuring routing entries" (page 102)
• "Configuring collaborative servers" (page 104)
• "Updating the database" (page 106)
• "Checking the status of registered endpoints" (page 107)
• "Checking the status of virtual D-channels" (page 108)
• "Checking the status of virtual trunks" (page 109)
Launching NRS Manager
Perform the following procedure to launch NRS Manager.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.