Configuring the sip redirect server and uri map, Figure 8 node maintenance and reports – Nortel Networks 5100 User Manual
Page 34
34
IP Peer Networking and Call Server configuration
Figure 8
Node Maintenance and Reports
20
Click Reset.
21
Click OK.
—End—
Configuring the SIP Redirect Server and URI map
Use this procedure to configure your SIP numbering plan mapping. You
can use this mapping to interpret TON/NPI numbers and map them to the
associated context (to or from SIP). The TON/NPI field explicitly maps to the
SIP phone-context attribute in the URI address.
Configuring the SIP Redirect Server and URI map
Step
Action
1
Log on to Element Manager.
2
Select IP Telephony > Nodes:Servers, Media Cards >
Configuration.
3
Expand the SIP URI Map heading.
See
Figure 9 "Edit SIP URI Map" (page 35)
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301
01.01
Standard
Release 4.5
27 October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.