Configuring the pretranslation table, Figure 32 pre translations – Nortel Networks 5100 User Manual
Page 80
80
IP Peer Networking and Call Server configuration
—End—
Configuring the pretranslation table
Perform the following procedure to configure the pretranslation table.
Configuring the pretranslation table
Step
Action
1
Log on to the MCS Provisioning Client.
2
Under the Provisioning folder, expand the Domains folder.
3
Expand the folder for the domain that you are configuring.
4
Expand the Telephony Routes folder.
5
Click Pretranslation Table.
The Pre translations page appears. See
Figure 32
Pre translations
6
Configure pretranslations for each of the number qualifiers in the
Add New Pretranslations section.
7
Select a Number Qualifier.
8
In the Length field, type the length of number to be pretranslated.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301
01.01
Standard
Release 4.5
27 October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.