Nortel Networks 5100 - Manual (Page 23)

23
IP Peer Networking and Call Server
configuration
IP Peer Networking and Call Server configuration procedures
The sequence of IP Peer Networking and Call Server configuration
procedures is as follows:
• "IP Peer Networking configuration" (page 24)
— "Defining LDN0" (page 25)
— "Defining customer to support ISDN" (page 26)
— "Configuring the SIP Gateway" (page 29)
— "Enabling the SIP Virtual Trunk application" (page 31)
— "Configuring the SIP Redirect Server and URI map" (page 34)
— "Creating the virtual D-channel" (page 36)
— "Configuring zones (LD 117)" (page 38)
— "Creating the virtual route (LD 16)" (page 41)
— "Creating the virtual trunks (LD 14)" (page 44)
— "Creating the Network Control Block (NCTL) for network access
(LD 87)" (page 45)
— "Creating the ESN data block for CDP" (page 46)
— "Creating the RLB for the virtual trunk route (LD 86)" (page 49)
— "Creating the CDP steering codes (LD 87)" (page 51)
— "Checking CODEC and QoS settings" (page 53)
• "Call Server configuration" (page 55)
— "Configuring Application Module Link (LD 17)" (page 55)
— "Configuring Value Added Server (LD 17)" (page 56)
— "Configuring the Automatic Call Distribution Directory Number (LD
23)" (page 57)
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.