Nortel Networks 5100 - Manual (Page 92)

92 NRS configuration
Figure 39
Service Domains
4 Select Service Domains.
5 Click Add.
6 Enter your Domain name and a Domain description.
These values must match that set for the Signaling Server.
7 Click Save.
The Service Domains page appears again with the new domain
added.
When no description is entered, the service domain is shown with
the message “Not available”. This means that the description is not
entered, but the service domain is still active. This applies to all
description fields in NRS Manager.
—End—
Configuring the L1 domain (UDP)
You can configure the L1 domain after you configure the service domain.
The L1 domain is a service domain associated with UDP.
Configuring the L1 domain (UDP)
Step Action
1 Log on to NRS Manager.
2 Select the Configuration tab.
3 Click Standby DB View to switch from active to standby database
view.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.