Nortel Networks 5100 - Manual (Page 91)

Configuring the service domain 91
• Mode
• UDP transport enabled/disabled
• UDP port
• UDP maximum transmission unit (MTU)
• TCP transport enabled/disabled
• TCP port
• TCP maximum transmission unit (MTU)
Make the values under SIP Server Settings the same as those you
configure for the SIP Proxy in Element Manager.
6 Under Network Connection Server (NCS) Settings, set the
following values:
• Primary NCS port number
• Alternate NCS port number
• Primary NCS timeout
7 Click Save.
—End—
Configuring the service domain
The NRS database information configured in this procedure is required by
both the SIP Redirect Server and the H.323 Gatekeeper.
Configuring the service domain
Step Action
1 Log on to NRS Manager.
2 Select the Configuration tab.
3 Click Standby DB View to switch from active to standby database
view. The active database view is the default view. Use the
active database for runtime queries, and the standby database for
administrator modifications. You must use standby view to make
changes to the database.
See
Figure 39 "Service Domains" (page 92) .
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.