Nortel Networks 5100 - Manual (Page 33)

IP Peer Networking configuration 33
9 For SIP Transport Protocol, select UDP.
TCP is the default. UDP means User Datagram Protocol in this
instance.
10 Verify the Local SIP Port.
The default is 5060.
11 Enter the SIP Domain Name.
The SIP Domain Name must be less than 128 characters in
length. Valid characters are a-z, 0-9, period, hyphen, comma, and
underscore.
This string builds all SIP messages and appears in the URI phone
context. If you enable the SIP Gateway application, specify this field.
This name must match the Service Domain name configured in NRS.
12 Enter the SIP Gateway Endpoint Name and Authentication
Password.
These values must match the data in NRS. The SIP Gateway
Endpoint Name becomes the Gateway’s user ID. The user ID and
password helps authenticate the Gateway with the MCS 5100 proxy
server if you configure Converged Desktop.
13 Select the Enable Gatekeeper check box.
14 For Network Routing Service Role, select Primary, Alternate,
or Failsafe.
15 Click Save and Transfer.
A message appears prompting you to reboot the system.
16 Click OK.
17 When a successful transfer message appears, indicating that the
system is done transferring data, click OK.
18 Select IP Telephony > Nodes:Server,Media Cards > Maintenance
and Reports.
19 Expand the Node ID.
See
Figure 8 "Node Maintenance and Reports" (page 34) .
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.