Nortel Networks 5100 - Manual (Page 55)

Call Server configuration 55
7 If you make configuration changes, click Save and Transfer;
otherwise, click Cancel.
—End—
Call Server configuration
The procedures in this section are as follows:
• "Configuring Application Module Link (LD 17)" (page 55)
• "Configuring Value Added Server (LD 17)" (page 56)
• "Configuring the Automatic Call Distribution Directory Number (LD 23)"
(page 57)
• "Configuring a Control Directory Number (LD 23)" (page 58)
• "Configuring Service DN for Converged Desktop (LD 90)" (page 59)
• "Configuring Personal Call Assistant (LD 11)" (page 60)
• "Configuring the Signaling Server" (page 62)
• "Configuring Converged Desktop users (LDs 10/11)" (page 67)
Configuring Application Module Link (LD 17)
Perform the following procedure to configure Application Module Link.
Configuring Application Module Link (LD 17)
Step Action
1 Connect to the Call Server.
2 Enter LD 17.
3 Enter the appropriate values as described in the following table.
For prompts not listed in the following table, press Enter to accept
the default.
—End—
Table 3
LD 17 — Application Module Link
Prompt Response Description
REQ CHG Change existing data
TYPE ADAN Action Device and Number
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301 01.01 Standard
Release 4.5 27 October 2006
Copyright © 2006, Nortel Networks Nortel Networks Confidential
.