Configuring zones (ld 117) – Nortel Networks 5100 User Manual
Page 38
38
IP Peer Networking and Call Server configuration
The Designator must not contain spaces; use underscores instead.
Make a note of the Designator in your records for future reference.
8
For User (USR), select Integrated Services Signaling Link
Dedicated (ISLD).
9
For Interface type for D-channel (IFC), select Meridian Meridian1
(SL1).
10
Leave all other parameters as is and click Submit.
The new channel appears.
—End—
Configuring zones (LD 117)
Before you can configure the virtual routes and trunks, the following zones
must be configured, in any order:
•
Zone 1 = IP Phones zone (ZBRN = MO)
•
Zone 2 = Voice Gateway Channels zone, which should be different from
the IP Phones zone (ZBRN = VTRK)
Ensure that enough bandwidth is allocated for the zones with the heaviest
traffic.
Never use or configure zone 0.
Configuring zones (LD 117)
Step
Action
1
Log on to Element Manager.
2
Select IP Telephony > Zones.
See
.
Enterprise: Common
Solution Integration Guide for Communication Server 1000/Multimedia Communication Server 5100
NN49000-301
01.01
Standard
Release 4.5
27 October 2006
Copyright © 2006, Nortel Networks
Nortel Networks Confidential
.