National Instruments PCI-1200 - Manual (Page 93)

© National Instruments Corporation I-1 PCI-1200 User Manual
Index
A
ACH<7..0> signal
definition (table), 3-3
input ranges (table)
bipolar analog input, 3-5
unipolar analog input, 3-5 to 3-6
ACK* signal (table), 3-27
A/D FIFO, 4-7
AGND signal (table), 3-3
AISENSE/AIGND signal
analog common signal, 3-5
definition (table), 3-3
analog input
circuitry, 4-6 to 4-7
illustration, 4-5
configuration. See analog input
configuration.
DAQ operations, 4-7 to 4-9
controlled acquisition mode, 4-8
freerun acquisition mode, 4-8
interval scanning acquisition mode,
4-8 to 4-9
multiple-channel scanned data
acquisition, 4-9
single-channel data acquisition, 4-9
DAQ rates, 4-10 to 4-11
maximum recommended rates
(table), 4-10
settling time vs. gain (table), 4-10
input modes. See analog input modes.
polarity
configuration, 2-3
settings (table), 2-2
signal connections. See analog input signal
connections.
specifications, A-1 to A-6
theory of operation, 4-5 to 4-11
analog input configuration, 2-2 to 2-5
analog I/O settings (table), 2-2
differential connections
purpose and use, 3-9
recommended input configurations
(table), 3-8
floating signal sources
differential connections, 3-11 to 3-12
recommended input configurations
(table), 3-8
ground-referenced signal sources
differential connections, 3-10
recommended input configurations
(table), 3-8
input modes, 2-3 to 2-5
input polarity, 2-3
analog input modes, 2-3 to 2-5
DIFF. See also differential connections.
definition (table), 2-4
purpose and use, 2-5
recommended input configurations
(table), 3-8
NRSE
definition (table), 2-4
purpose and use, 2-4 to 2-5
recommended input configurations
(table), 3-8
single-ended connections for
ground-referenced signal sources,
3-13 to 3-14
RSE
definition (table), 2-4
purpose and use, 2-4
recommended input configurations
(table), 3-8
single-ended connections for floating
signal sources, 3-13