NorthStar Navigation NorthStar 8000i - Manual (Page 130)

130 Northstar 8000i Operation Manual
2. Select
Orientation.
3. The
Motion Mode button shows the current setting. Select the
button if you want to toggle to the other setting. The new setting is
applied immediately and stays until you change it again.
4. When you are finished, select Return.
21.12 Reset the TM position
This works only when heading data is available.
The current motion mode is shown in the status bar at the top of the Radar screen.
You can reset the TM position only when the radar is transmitting.
To reset the TM position:
1. Display the Radar screen and control panel, then press the Vessel
key.
Alternatively:
1. Display
the Radar screen and control panel. If you can't see the
Orientation button, select Return.
2. Select
Orientation.
3. Select
Reset TM Position. The Radar screen is refreshed and your
vessel is automatically re-positioned.
4. When you are finished, select Return.