NorthStar Navigation NorthStar 8000i - Manual (Page 144)

144 Northstar 8000i Operation Manual
4. Select the new setting. The new setting is applied immediately and
stays until you change it again.
25.3 Remove target trails from the radar
You can clear all the existing target trails from your Radar screen. However, the
target trails will start to appear again unless you turn them Off (see "Turn off or
customize target trails").
To clear the target trails:
1. Display the Radar screen and the control panel. If you can't see the
Presentation button, select Return.
2. Select
Presentation.
3. Select
Clear Trails. The target trails immediately disappear.
4. When you are finished, select Return.