NorthStar Navigation NorthStar 8000i - Manual (Page 30)

30 Northstar 8000i Operation Manual
5. When you are finished, select – Installation.
3.10 Select the time format
You can use the 12 hour or 24 hour time format. 24 hour is the default.
To select the time format:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ System to display a list of system specification options.
4. The
Time Format button shows the current setting. Select the
button if you want to change the setting and a list of choices appears.
5. Select the new setting. The new setting is applied immediately and
stays until you change it again.
6. When you are finished, select – System.
3.11 Select your time zone
To select your time zone:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ System to display a list of system specification options.
4. The
Time Zone button shows the current setting offset from GMT.
Select EDIT if you want to change the setting and enter the offset
using the onscreen keyboard.