NorthStar Navigation NorthStar 8000i - Manual (Page 189)

Northstar 8000i Operation Manual 189
40 Camera
The 8000i can integrate video feed from an onboard camera.
An onboard camera can improve the security of your vessel, or be useful for
docking, for rear vision, or for viewing the engine room.
You can use a conventional camera or an Axis Network camera. This section
explains how to use an Axis Network camera.
40.1 What types of camera are supported?
You can use either of the following Axis Network cameras with the 8000i:
•
Axis 206 fixed camera
•
Axis 211 fixed camera
If you're using a conventional camera, you can connect it to the 8000i using the
Video Aux I (see "Video Aux In" page 187)n facility and view the video feed
through Video Aux In.
40.2 Add the camera to the network
The new camera must be installed according to the manufacturer's instructions,
then plugged into the 8000i system.
To add the camera to the network:
1. Select Display.
2. Select
Camera. The 8000i automatically detects the new camera.
40.3 View the camera in full screen mode
To view the camera in full screen mode:
1. If you want the camera to cover the entire screen, select Full Screen
from the camera control panel.
2. To show the camera control panel again, just touch or click anywhere
on the screen.