NorthStar Navigation NorthStar 8000i - Manual (Page 176)

176 Northstar 8000i Operation Manual
35 CD/DVD options
You can use the CD/DVD options to:
•
play a music CD
•
pause playing a music CD
•
resume playing a music CD
•
play tracks randomly on the music CD
•
repeat the music CD
•
play the next or previous track on the music CD
•
select a particular track on the music CD
35.1 Play a music CD
To play a music CD:
1. Insert the music CD into the drive and close the tray. The 8000i
immediately starts to play the music CD.
2. If you want to display the tracks (listed as Track 1, Track 2, and so on),
select Display, then select CD/DVD.
NOTE: If you are playing music in a pane, the 8000i will continue to play the music,
even if the pane is not active or not visible, until you pause the music or select
another pane that has audio.
35.2 Set random play On/Off on a music CD
You can toggle the random play option On or Off, to play tracks on the music CD
at random or in order. Off (play tracks in order) is the default.
To set random play On/Off on a music CD:
1. Select
Display, then select CD/DVD.
2. The 8000i displays the CD/DVD screen for the music CD that is in the
drive, and a control panel.
3. The
Random button displays the current setting. Select the button if
you want to toggle to the other setting. The new setting is shown and
takes effect at the end of the current track. The new setting stays until
you change it again.
35.3 Select a particular track on a music CD
This works only when a music CD is playing and the CD/DVD screen and control
panel are displayed.
To select a particular track on a music CD:
1. Select the track that you want to play in the information box. (If you
can't see the track in the information box, use the arrow buttons to
scroll through the track listing.)