NorthStar Navigation NorthStar 8000i - Manual (Page 29)

Northstar 8000i Operation Manual 29
3.6 Select a palette
You can select a palette to suit sunlight, daytime, or night time conditions.
To select a palette:
1. Select
Display. The Palette button shows the current setting.
Select the button if you want to change the setting and a list of choices
appears.
2. Select the new setting. The new setting is applied immediately and
stays until you change it again.
3.7 Show/hide the control panel
You can show or hide the control panel (the buttons down the right hand side of
the screen) when you're using a function.
Show is the default.
To hide the control panel:
1. Select Display, then select Hide Control Panel.
To show the control panel:
1. Select
Display, then select Control.
3.8 Show/hide the instruments bar
You can show or hide the instruments bar along the bottom of the screen.
To show the instruments bar:
1. Select
Display, then select Show Instruments Bar.
To hide the instruments bar:
1. Select Display, then select Hide Instruments Bar.
3.9 Show/hide the top control bar
You can choose whether to show or hide the top control bar along the top of the
screen. (The buttons in the top control bar duplicate the keys.)
If you change this setting, the 8000i will restart automatically.
To show or hide the top control bar:
1. Select
Display, then select Setup from the control panel.
2. Select
+Installation to display the installation specification
options.
3. The
Display Top Control Bar check box shows the current
setting.
4. Select the check box if you want to toggle to the other setting. The
8000i restarts automatically and the new setting stays until you change
it again.