NorthStar Navigation NorthStar 8000i - Manual (Page 181)

Northstar 8000i Operation Manual 181
36.6 Rewind a video
To rewind a video:
If a video is already playing and you want to rewind back through it, just use the
progression track at the bottom of the screen to select the point you want to go
back to.
Alternatively:
1. Select
Rewind from the video control panel.
2. The video starts to rewind at double speed (2x).
3. Select
Rewind again if you want to increase the rewind speed. You
can keep selecting Rewind until you reach the maximum rewind
speed (64x). (If you're rewinding at 64x and select Rewind again,
rewinding stops and play resumes.)
4. Select
Play to stop rewinding and resume playing the video.
36.7 Set repeat play On/Off for a video
You can toggle the repeat play option On or Off, to play the video continuously or
just once. Off (single play) is the default.
To set repeat play On/Off for a video:
1. If a video is already playing, the Repeat button in the video control
panel displays the current setting.
2. Select the button if you want to toggle to the other setting. The new
setting is shown immediately and stays until you change it again.
36.8 Play a different video
To play a different video:
1. If a video is already playing but you want to play a different video
instead, choose Select Video from the control panel.
2. The 8000i stops playing the current video and lists the contents of the
video jukebox.
3. Select the video that you want to play. The 8000i highlights that video.
4. Select
Play Selected Video to start playing the new video.