NorthStar Navigation NorthStar 8000i - Manual (Page 18)

18 Northstar 8000i Operation Manual
2 Introduction to the Northstar 8000i
This section introduces the 8000i and shows you how to use the basic
functionality.
It's best to work through this section with the 8000i set up and running so you can
try out the various functions and see the results.
2.1 Turn on the 8000i
To turn on the 8000i using a 12" Display Processor:
1. Just press the Power key to turn on the 8000i.
2. The Northstar 8000i screen appears briefly, followed by an information
screen. (This appears each time that you start the 8000i.) If you agree to
the conditions of use, select Accept Conditions of Use.
3. The Chart screen appears in a single pane. The 8000i is ready to use.
To turn on the 8000i using a 15" Monitor (preferred method):
Use this method when the Black Box Processor and the 15" Monitor are both wired
together as recommended in the 15’’ Installation Manual.
1. Press the Power key on the 15" Monitor.
2. The Northstar Marine Monitor screen may appear briefly, followed by
the Northstar 8000i screen.
3. An information screen appears. (This appears each time that you start
the 8000i.) If you agree to the conditions of use, select Accept
Conditions of Use.
4. The Chart screen appears in a single pane. The 8000i is ready to use.
To turn on the 8000i using a 15" Monitor (alternative method):
Use this method when the Black Box Processor and the 15" Monitor are wired
independently.
1. If the Black Box Processor is turned off, press the Power (ON/OFF) key
at the rear.
2. The Power LED at the rear will glow red when the Black Box Processor
is on.
3. Press the Power key on the 15" Monitor.
4. The Northstar Marine Monitor screen may appear briefly, followed by
the Northstar 8000i screen.
5. An information screen appears. (This appears each time that you start
the 8000i.) If you agree to the conditions of use, select Accept
Conditions of Use.
6. The Chart screen appears in a single pane. The 8000i is ready to use.