NorthStar Navigation NorthStar 8000i - Manual (Page 196)

196
Northstar 8000i Operation Manual
42.16 Restore routes, tracks, and waypoints
Use this to restore your routes, tracks, and waypoints if the data has been
corrupted.
To restore your routes, tracks, and waypoints:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ Restore to display a list of system options.
4. Select
Routes Tracks and Waypoints.
5. The 8000i displays the Restore Routes, Tracks and Waypoints to Master
box with a list of the backups for all the display units in the 8000i
networked system.
6. Select either:
ƒ the backup that you want to restore, then select Restore
Selected Backup, then select OK to confirm.
ƒ
Restore Factory Defaults to restore the local settings to the
factory defaults, then select OK to confirm.
7. Select
OK again.
8. When you are finished, select Return, then select – Restore.
42.17 Restore global settings
Use this to restore the global settings if the data has been corrupted.
Global settings are applied to all the display units in the 8000i networked system.
The global settings are stored on the master unit.
To restore your global settings:
1. Select
Display.
2. Select
Setup from the control panel.
3. Select
+ Restore to display a list of system options.
4. Select
Restore Global Settings.
5. The 8000i displays the Restore Global Settings to Master box with a list
of the backups for all the display units in the 8000i networked system.
6. Select either:
ƒ the backup that you want to restore, then select Restore
Selected Backup, then select OK to confirm.
ƒ
Restore Factory Defaults to restore the local settings to the
factory defaults, then select OK to confirm.
7. Select
OK again.
8. When you are finished, select Return, then select – Restore.