Ricoh Aficio 2051/2060/2075 - Manual (Page 125)

Changing the Paper Size
113
5
Changing the Paper Size
Preparation
Always select the paper size with
User Tools. Otherwise, misfeeds
might occur.
Reference
For details about paper sizes, and
types see p.153 “Copy Paper”.
Important
❒ If you wish to change the paper
size set in the paper tray 1 or the
optional large capacity tray (LCT),
contact your service representa-
tive.
❒ Do not stack paper higher than the
limit mark inside the tray.
Note
❒ Shuffle the paper before loading.
❒ Straighten curled or warped paper
before loading.
Changing the Paper Size in
Tray 2 or 3
AAAA
Make sure the paper tray is not
being used. Then fully pull out
the paper tray.
Remove the paper in the tray.
BBBB
Press the lock button. Adjust the
side fences and back fence to the
new paper size while pushing the
release lever.
CCCC
Square the paper and load it in
the paper tray. Press the lock but-
ton.
DDDD
Set the paper size selector knob
inside the tray to the new size.
MarC25-AE_gsg_F_pre_FM.book Page 113 Thursday, October 21, 2004 5:20 PM