Non-recommended paper – Ricoh Aficio 2051/2060/2075 User Manual
Page 167
Copy Paper
155
8
*9
When loading paper, make sure the stack height does not exceed the lower limit
mark of the paper tray. The amount of paper that can be set is 10 mm/100 sheets ap-
proximately. See p.96 “
B Loading Paper”.
*10
It is recommended to place one sheet at a time.
*11
When loading translucent papers, set the paper direction according to the grain.
Important
❒ If you use damp or curled paper, a misfeed may occur.
Note
❒ When loading paper in the paper trays 1-3, place the copy side face down.
❒ When loading paper in the large capacity tray (LCT), place the copy side face
down.
❒ When loading paper in the bypass tray, place the copy side face up.
❒ When you use the bypass tray, it is recommended to set the copy paper direc-
tion to
L.
❒ Do not use paper for inkjet printers.
❒ When you load OHP transparencies, check the front and back of the sheets,
and place them correctly, or a misfeed might occur. Set the paper direction to
L. For details, see Copy Reference.
❒ When you use OHP transparencies, fan them for each use.
❒ If multiple sheet feeding occurs, load sheets one by one.
❒ When you load label paper, set the paper direction to K.
❒ If you load paper of the same size in the same direction in two or more trays,
the machine automatically shifts to the other tray when the first tray in use
runs out of paper. This function is called Auto Tray Switching. (However, if
the Paper Type of one tray is recycled or special paper, the settings of the oth-
er trays must be the same for the Auto Tray Switching function to work.) This
saves interrupting a copy run to replenish paper when making a large
number of copies. See p.56 “Tray Paper Size: (Tray 2,3)”, and Copy Reference.
Non-recommended Paper
R CAUTION:
Important
❒ Do not use any of the following kinds of paper or a fault might occur.
• Paper for inkjet printers
• Do not use aluminum foil, carbon paper, or similar conductive paper to avoid
a fire or machine failure.
MarC25-AE_gsg_F_pre_FM.book Page 155 Thursday, October 21, 2004 5:20 PM