Ricoh Aficio 2051/2060/2075 - Manual (Page 141)

Maintaining Your Machine
129
6
Maintaining Your Machine
If the exposure glass or ADF is dirty,
you might not be able to make clear
copies. Clean these parts when you
find them dirty.
❖ ❖ ❖ ❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then, wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvents, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
Cleaning the Exposure Glass
A
Clean 1 and 2.
Cleaning the Auto Document
Feeder
AAAA
Clean the white sheet of the ADF.
BBBB
Pull the lever.
CCCC
Wipe the scanning glass.
ACC028S
MarC25-AE_gsg_F_pre_FM.book Page 129 Thursday, October 21, 2004 5:20 PM