Ricoh Facsimile User Manual
Page 16
Transmission Mode
6
1
EEEE
Confirm the selected sender, and
then press [OK].
FFFF
Select [On] or [Off] for the Stamp
Sender Name.
Printing on the Receiver's Sheet
If you enable this function, the
sender's name (user name) ap-
pears on the receiver's sheet, lists,
and report.
A Select [On] for the Stamp Send-
er Name function.
When an E-mail address is
Registered
If the sender's e-mail address is
registered you can specify whether
or not to send the transmission re-
sult by e-mail to the sender. If you
enable this function, sent to the
registered mail address.
Note
❒ When a user logs in with User
ID, the Immediate TX Result Re-
port is sent by e-mail to the
logged-in user.
A Select [Yes] or [No] for the E-
mail TX Results function.
GGGG
Press [OK].
The display returns to that of Step
C
.
Note
❒ The selected sender's name ap-
pears above [Sender Settings].
The sender name is displayed in
up to 14 characters, followed by
an ellipsis (. . . ).
JupterC2_Fax_EN-F_FM.book Page 6 Monday, November 29, 2004 3:48 PM