Ricoh Facsimile - Manual (Page 26)

Transmission Mode
16
1
Polling Reserve Report
This report is printed after Polling Re-
ception has been set up.
Note
❒ You can turn this function on or off
with the User Parameters. See
p.166 “User Parameters” (switch
03, bit 3).
❒ You can have a destination dis-
played with the User Parameters.
See p.166 “User Parameters”
(switch 04, bit 4).
❒ You can display a sender name
with the User Parameters. See
p.166 “User Parameters” (switch
04, bit 5).
Polling Result Report
This report is printed after a Polling
Reception has been completed and
shows its result.
If E-mail TX Results is programmed
in a Quick Operation key, you can se-
lect whether a report e-mail is sent af-
ter reception. See p.146 “Quick
Operation Key”.
Note
❒ You can also check the result of a
Polling Reception with the Journal.
See p.27 “Printing the Journal”.
❒ You can turn this function on or off
with the User Parameters. See
p.166 “User Parameters” (switch
03, bit 4).
❒ To view the report without text
disruption, select a font of even
character width in your e-mail ap-
plication's settings.
❒ You can display a destination with
the User Parameters. See p.166
“User Parameters” (switch 04, bit
4).
❒ You can display a sender name
with the User Parameters. See
p.166 “User Parameters” (switch
04, bit 5).
JupterC2_Fax_EN-F_FM.book Page 16 Monday, November 29, 2004 3:48 PM