Ricoh Facsimile User Manual
Page 180
Administrator Setting
170
9
Changing the User Parameters
Preparation
Access to some User Parameter
Settings requires installation of op-
tional equipment, or that other set-
tings be made beforehand.
Important
❒ We recommend you print and keep
a User Parameter list when you
program or change a User Parame-
ter. See p.171 “Printing the User
Parameter List”.
❒ Do not change any bit switches
other than those shown on the pre-
vious pages.
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [Facsimile Features].
CCCC
Press [Administrator Tools].
DDDD
Press [Parameter Setting].
EEEE
Select the switch number you want
to change.
FFFF
Select the bit number you want to
change.
When the bit number is pressed,
the current value switches be-
tween 1 and 0.
Note
❒ Repeat from step
F
to change
another bit number for the same
switch.
GGGG
Press [OK].
32
0 Quotation Priority for a desti-
nation when there is no desti-
nation of the specified type.
Paper Output Priority
<Priority Order>
1. IP-Fax destina-
tion
2. Fax number
3. E-mail address
4. Folder
Electronic Output
Priority
<Priority Order>
1. E-mail address
2. Folder
3. IP-Fax destination
4. Fax number
34
0 Use gatekeeper server with
IP-Fax
Off
On
1 Use SIP server with IP-Fax
Off
On
Switch
Bit
Item
0
1
FaxAdEN_Chapter-9 Page 170 Monday, December 13, 2004 5:39 PM