Ricoh Facsimile - Manual (Page 160)

Facsimile Features
150
8
IP-Fax Settings
Make settings to use IP-Fax.
Set H.323 for the gatekeeper, SIP for
SIP server, and gateway for G3 fax if
necessary. Check the settings of the
network to which this machine is con-
nected before making settings.
Note
❒ The following characters can be
used for registration of the alias
telephone number in H.323 Set-
ting. Make sure you enter these
characters correctly:
• Numbers
• Symbols (# and *)
❒ The following characters can be
used for registration of the SIP
User Name in SIP Setting. Make
sure you enter these characters
correctly:
• Alphanumerical lower and up-
per cases
• The 21 symbols in the table be-
low.
❒ Enter the correct IP addresses for
the gatekeeper, SIP server and
gateway, which you have been in-
formed by the network Adminis-
trator, using numbers and a period
(“.”).
❖ ❖ ❖ ❖ Enable H.323
Specify whether or not H.323 is
used for IP-Fax transmission.
• On
• Off
❖ ❖ ❖ ❖ Enable SIP
Specify whether or not SIP is used
for IP-Fax transmission.
• On
• Off
❖ ❖ ❖ ❖ H.323 Settings
Set the IP address and alias tele-
phone number of the gatekeeper.
Note
❒ If you select “On” using the
User Parameters, you can use
the gatekeeper server. See p.166
“User Parameters”(switch 34,
bit 0)
A Press [H.323 Settings].
B Press [Change] for each proper-
ty.
; ? : & =
+ $ , - _
. ! ~ * #
‘ ( ) % /
@
FaxAdEN_Chapter-8 Page 150 Monday, December 13, 2004 5:34 PM