Roland VS-1824 - Manual (Page 100)

100
Add Finishing Touches to Your Song
fig.5-01a
4
Select the track that you wish to playback. Hold down [STOP]
and press the [STATUS] button of the tracks that you wish to
playback. For this example, hold down [STOP] and press the
track 1–6 [STATUS] buttons. [STATUS] will light green.
5
Press the [SELECT] button of the track channel(s) to which you
wish to apply the effect. For this example, press the track
channel 1 [SELECT] button. [SELECT] will light, and the Track
Mixer display will appear.
6
Press [F1 (FX1)]. If [F1] does not show “FX1,” first press
[PAGE] so that “FX1” appears, and then press [F1 (FX1)].
7
Press [F6 (PRM.V)]. A list of the effect settings for each track
will appear.
If a VS8F-2 effect expansion
board has not been
installed, it will not be
possible to use the internal
effects.
10 11
9
7
6
5
8
4