Roland VS-1824 - Manual (Page 122)

122
Add Finishing Touches to Your Song
fig.5-30
7
Use [ ], [ ], [ ], and [ ] to move the cursor. Use the
TIME/VALUE dial to make settings.
fig.2-20.e
FX1 (effect insert switch 1)
Select how the effect will be connected.
Off : The effect will not be inserted.
Ins : The stereo effect will be inserted into both channels. The inserted
effects are shown as icons and as patch names (up to ten characters).
Snd (effect send level)
Adjust the volume level of the signal that is sent to the insertion effect (-42–
6 dB). By default, this will be “0 dB.”
Rtn (effect return level)
Adjust the volume level of the signal that is output from the insertion effect
(-42–6 dB). By default, this will be “0 dB.”
7, 10
7
8 9 11 12 13
Effect Insert Switch
Insert Send Level
Insert Return Level