Roland VS-1824 - Manual (Page 116)

116
Add Finishing Touches to Your Song
fig.5-29
7
Hold down [STOP], and press the [STATUS] button for all
tracks (13–16) that you wish to mixdown. The STATUS
indicators will light green.
fig.5-15
8
Press [PLAY]. The song will play back.
9
Raise and lower the master fader, and verify that the volume
of each track changes.
10
Use the channel faders (1–16) to adjust the volume balance of
each track. At this time the sound that is being output from the
MASTER jacks (volume levels, panning) will be recorded to
the mastering tracks. It is best to set the volume as high as
possible without causing the volume to distort.
11, 15 8, 14 13 10 9 7
You cannot record the
sound on tracks 17 and 18
to the mastering tracks.
The sound that passes
through the master fader
will be recorded on the
mastering tracks.
In order
to record at the optimal
audio quality, you should
normally set this to the
0 dB position.
If you adjust the Track
Channel Fader 1–12;
Press [FADER/MUTE] so
that the TR (track) indicator
is lit.
If you want to adjust the
Track Channel Fader 13–18;
Press [FADER/MUTE] so
that the TR (track) indicator
blinks.