Roland VS-1824 - Manual (Page 121)

121
Add Finishing Touches to Your Song
Add Finishing Touches
to Your Song
3
Select the “Status” of the mastering tracks. Rotate the TIME/
VALUE dial.
fig.5-23
4
Use [ ], [ ], [ ], and [ ] to move the cursor to
“Status.” For this example, select “Rec.”
Status
Specify the status of the master tracks. For this example select “Off.”
Off : The mastering tracks will not be used.
Rec : Play back tracks 1–16 and record on the mastering tracks.
Play : Play back the mastering tracks. The sound of tracks
1–16 will not be output from the MASTER jacks.
5
Use [ ], [ ], [ ], and [ ] to move the cursor to “FXIns.”
fig.5-24
6
Press [ENTER (YES)].
For details on the signal
flow (routing) at this time,
refer to
Signal Flow
(Routing) (p. 125).