Roland VS-1824 - Manual (Page 105)

105
Add Finishing Touches to Your Song
Add Finishing Touches
to Your Song
29
Press [PLAY]. The song will play back.
30
Raise and lower channel fader 7, and verify that the volume of
the recording tracks (7 and 8) changes. Track channel fader 7
or 8 is used for monitoring. It does not affect the recording
level. You can record even if you hear no sound. Adjust the
volume to a comfortable listening level.
31
Press [ZERO]. You will return to the beginning of the song.
32
Hold down [REC] and press the [STATUS] button of the track
that you wish to record. For this example, hold down [REC]
and press the track 7 or 8 [STATUS] button. [STATUS] will
blink red.
33
Press [REC]. The [REC] indicator will blink red.
34
Press [PLAY]. The [PLAY] indicator will light green, and
recording will begin.
35
When you finish recording, press [STOP]. The song will stop.
36
Listen to the recorded result. Press [ZERO]. You will return to
the beginning of the song.
37
Mute tracks 1–6 (so that they will not produce sound). Press
the track 1–6 [STATUS] buttons so they are not lit.
38
Press [PLAY]. The song will play back. Use channel fader 7
and the master fader to adjust the volume to a comfortable
listening level.