Roland VS-1824 - Manual (Page 38)

38
Making a Multi-Track Recording
Adjusting the Input Sensitivity
fig.3-09
1
Press [PLAY (DISPLAY)].
2
Hold down [SHIFT] and press [ ] or [ ] so that the center
section of the display is enclosed in a bold frame.
3
Press [F2 (LM In)]. If [F2] does not show “LM In,” first press
[PAGE] so that “LM In” appears, and then press [F2 (LM In)].
Now the level meters will show the volume level of the input
source.
fig.3-10_80
4
Make sure that the lower left of the center line of the display
indicates “Pre.” If it indicates “Pst,” press [F4 (
→ PRE)]. The
volume levels before passing through the channel fader (Pre
Level) will be displayed.
1 4 3
2
8
6 5 9, 10
7