Roland VS-1824 - Manual (Page 72)

72
Using Effects
Applying a Loop Type Effect During
Playback
It is common to apply a loop type effect such as reverb or delay during
playback. The following example shows how you can apply reverb (FX1) to
track 1 during playback.
fig.4-02
1
Press [PLAY (DISPLAY)].
2
Press [FADER/MUTE] so that the TR (track) indicator is lit.
3
Select the track(s) for playback. Hold down [STOP] and press
the track 1 [STATUS] button. [STATUS] will light green.
4
Press the [SELECT] button for the track channel to which you
wish to apply the effect. For this example, press the track
channel 1 [SELECT] button. [SELECT] will light, and the Track
Mixer display will appear.
5
Press [F1 (FX1)]. If [F1] does not show “FX1,” first press
[PAGE] so that “FX1” appears, and then press [F1 (FX1)].
3
1 4
5
6
8 7
2