Roland VS-1824 - Manual (Page 88)

88
Using Effects
fig.4-09b
18
Press [FADER/MUTE] so that the IN (input) indicator is lit.
19
Raise and lower channel fader 11 (EFFECT1), and verify that
the effect return volume changes. The input channel fader is
used to make fine adjustments to the recording level. Set it to
an appropriate position.
20
Press [FADER/MUTE] so that the TR (track) indicator is lit.
21
Assign the effect return to the recording track. Hold down the
track 3 [STATUS] button, and press the [EFFECT1 RTN] of the
input channel. [EFFECT1 RTN] will blink.
18, 20 21
19
At this time, the return
signal from the effect will
no longer be output
directly to the master out.