Roland VS-1824 - Manual (Page 78)

78
Using Effects
fig.4-06a
11
Press the [SELECT] button for the channel to which you wish
to apply the effect. For this example, press the track channel r
[SELECT] button. [SELECT] will light, and the Track Mixer
display will appear.
12
Press [F1 (FX1)]. If [F1] does not show “FX1,” press [PAGE] so
that “FX1” appears, and then press [F1 (FX1)].
13
Use the TIME/VALUE dial to turn the effect on/off. Select
either “Pre” or “Pst.” For this example, select “Pst” so that the
effect will be applied to the sound after it has passed through
the channel fader.
fig.4-03a_80
16
13, 17
14 15
11 12 18