Ricoh 270 - Manual (Page 101)

B Loading Paper
89
3
B Loading Paper
Note
❒ If you want to change the paper
size, see
⇒
P.103 “Changing the Pa-
per Size” .
Reference
Regarding paper types and sizes
that can be set, see
⇒
P.19 “Copy
Paper” .
A
Pull out the paper tray until it
stops.
B
Square the paper and set it in the
tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
Loading non-standard size paper
in the tray 2
A When you set the non-standard
size paper in tray 2, do not
stack the paper above the low-
er limit mark of tray 2.
C
Reinstall the back fence.
D
Push the paper tray in until it
stops.