Ricoh 270 - Manual (Page 108)

What to do If Something Goes Wrong
96
3
Important
❒ Remove the photo conductor unit keeping the unit parallel to the ground
as shown in the illustration. Otherwise, the toner in the unit might scatter.
❒ Do not touch the inside of the unit or the green parts, after the black pro-
tection sheet is removed.
I
Align the new photo conductor unit onto the rail of the machine. Slide the
unit all the way into the machine.
J
Push the unit into the machine until it clicks into place.
K
Remove the red sheet from the photo conductor unit and remove the two
pieces of tape.