Ricoh 270 User Manual
Page 55
Copying from the Bypass Tray
43
2
A Press the {
#
} key.
B Press the
[Pap.Size]
key.
C Select
[Custom Size]
key by
pressing the 1 key. Then press
the
[OK]
key.
D Enter the horizontal size of the
paper with the Number keys,
then press the {
#
} key.
Note
❒ To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
E Enter the vertical size of the pa-
per with the Number keys,
then press the
[OK]
key.
Note
❒ To change the number en-
tered, press the {
Clear/Stop
}
key and enter the new num-
ber.
❒ When you copy onto plain
paper, go to step
G.
F Press the
[Pap.Type]
key when
copying onto thick paper.
G Select
[Non Standard]
by press-
ing the 1 key. Then press the
[OK]
key.
H Press the
[Exit]
key.
When copying onto non-detected
standard size paper
Important
❒ You should specify the size of
paper to avoid paper misfeeds.
A Press the {
#
} key.
B Press the
[Pap.Size]
key.