Ricoh 270 - Manual (Page 132)

User Tools (Copy Features)
120
4
16. Key Op. Tools
If the machine is set to use the User Code function, operators must input their user
codes before the machine can operate.
The machine can keep count of the number of copies made under each user code.
1. User Code Mgmt. Specify whether to employ user codes to restrict copier us-
ers and manage the number of copies made.
Note
❒ Default: Off
2. Counter Reset You can check the number of copies made under each user
code. You can also reset each user code's counter to 0.
Note
❒ If more than one user code is registered, you can view all
the counters using the [
↑
Prev.] or [
↓
Next] key.
3. Clear Code/Counter You can delete all user codes or reset all counters to 0.
4. Prog. User Code You can register user codes.
Note
❒ Up to 50 user codes (8 digits or less) can be registered.
5. Chg/Del User Code You can change or delete user codes.
Note
❒ The number of copies made under the old code is added
to that made under the new user code.
❒ The number of copies made under the deleted code is
also deleted.
6. Counter List Print You can print a list of counters shown by user code.
Limitation
❒ If A4, 8 1 /
2
"
×
11" or larger paper is not set in the paper
trays, this list cannot be printed.
Note
❒ To stop the printing, press the [Cancel] key.
Menu Description