Ricoh 270 - Manual (Page 118)

What to do If Something Goes Wrong
106
3
C
Press the [
↑
Prev.] or [
↓
Next] key
until the page with the paper size
you require is displayed.
When the paper size you require
is displayed
A Press the 0 or 1 key to select
the paper size. Then press the
[OK] key.
When the paper size you require
is not displayed
Note
❒ You can also specify the tray2
size with the User Tools (Sys-
tem Settings). See “11. Special
Pap. Size” in the System Set-
tings Reference.
A When
[Custom Size] screen is
shown, press the [OK] key.
B Enter the horizontal size then
press the { # } key.
C Enter the vertical size then
press the [OK] key.
D
Press the [Pap.Type] key.
E
Press the 0 or 1 key to select the
paper type. Then press the
[OK]
key.
F
Press the [Exit] key.