Ricoh 270 - Manual (Page 52)

Copying
40
2
To stop scanning
When you are using the Sort, Stack, or
Staple function, the originals are
scanned into memory.
A
Press the { Clear/Stop } key.
To resume scanning
A Press the {
Start } key.
Scanning is resumed.
Note
❒ Scanned images in memory
are not cleared.
To clear all scanned images
A Press the {
Clear Modes } key.
Scanning is stopped and the set-
tings are cleared.
When memory reaches 0%
Scanning will be stopped if the size of
scanned image data exceeds memory
capacity.
Note
❒ The number of originals that can
be stored in memory varies de-
pending on the memory setting
and original type.
❒ The maximum number of originals
that can be stored is about 100 pag-
es.
Reference
For details, see “08. Print Quality”
and “09. Image Adjustment” in
⇒
P.117 “1. General Features 2/4”
To copy scanned so far originals
A
Press the [Print] key.
The scanned pages are delivered to
the tray then the image data in
memory is cleared.
B
Remove the copies and continue
copying by following the instruc-
tions on the display.
To cancel the copy operation
A
Press the [Clear] key.
Scanning is stopped and the set-
tings are cleared.