Ricoh 270 - Manual (Page 96)

What to do If Something Goes Wrong
84
3
Display
You cannot enter the
desired copy set num-
ber. The number of copies exceeds
the maximum copy quantity. You can change the maximum
copy quantity that you can
make at a time. See “05. Max.
Copy Q'ty” in
⇒
P.117 “1.
General Features 2/4”
The machine instructs
you to set the duplex
tray. -- Reset the duplex tray correct-
ly. See
⇒
P.5 “Guide to Compo-
nents” .
The machine instructs
you to set the key
counter. Set the key counter.
Problem Cause Action
The panel display is
off. The machine is in Energy Sav-
er mode. Press the { Energy Saver } key to
cancel Energy Saver mode.
The operation switch is
turned off. Turn on the operation switch.
The main power switch is
turned off. Turn on the main power
switch.
Nothing happens
when the operation
switch is turned on. The main power switch is
turned off. Turn on the main power
switch. See
⇒
P.5 “Guide to
Components”
The power cord is unplugged. Maker sure that the power
cord is plugged into the wall
outlet firmly.
Machine's Condition Problem/Cause Action