Ricoh 270 - Manual (Page 54)

Copying
42
2
1: Horizontal size
2: Vertical size
3: Extender
4: Paper guide
Important
❒ If the guides are not flush with
the copy paper, a skew image or
paper misfeeds might occur.
Note
❒ Do not stack paper over the lim-
it mark; otherwise a skew image
or paper misfeeds might occur.
❒ Set the direction of the copy pa-
per to L.
❒ Swing out the extender to sup-
port larger size copy paper
(larger than A4L, 8
1 /
2
"
×
11"L).
❒ Fan paper to get air between the
sheets and avoid a multi-sheet
feed.
When copying onto OHP
transparencies
A Lightly insert the OHP trans-
parencies face up and adjust
the paper guide.
Important
❒ The side of OHP transparen-
cies that is copied is fixed. Be-
fore you set the OHP
transparencies in the bypass
tray, check the cutting posi-
tion of the OHP transparen-
cies.
D
Push down the paper guide re-
lease lever.
is selected automatically.
Note
❒ If you set A4, 8 1 /
2
"
×
11" or larg-
er copy paper, hold the edge of
the paper and push down the
paper guide release lever.
❒ If you do not push down the pa-
per guide release lever, a mis-
feed might occur.
When copying onto non-standard
size copy paper
Important
❒ You should specify the size of
copy paper to avoid paper mis-
feeds.