P.77 “when changing the number, Ing format – Ricoh 270 User Manual
Page 89
Advertising
Preset Stamp—Printing Preset Messages on Your Copies
77
2
When changing the numbering
format
A Press the
[Prt.Page]
key.
B Select the desired mode by
pressing the 01 keys. Then
press the
[OK]
key.
D
Press the
[OK]
key.
E
Press the
[Exit]
key.
F
Set your originals, then press the
{
Start
} key.
Note
❒ When you set the original on the
exposure glass and select the
[1st Page Only]
key, press the {
#
}
key after all originals are
scanned.
Advertising
This manual is related to the following products: