Copying from the bypass tray, P.41 “copying from the bypass tray, P.41 “copying from the by – Ricoh 270 User Manual
Page 53: Pass tray, 2copying from the bypass tray
Copying from the Bypass Tray
41
2
Copying from the Bypass Tray
The optional bypass tray is required to use this function.
Use the bypass tray to copy onto OHP
transparencies, adhesive labels, trans-
lucent paper, post cards, and copy pa-
per that cannot be set in the paper
tray.
Note
❒ The machine can automatically de-
tect the following sizes as standard
size copy paper:
❒ If you do not use standard size
copy paper, you should input ver-
tical and horizontal dimensions.
The sizes that you can input are as
follows:
Reference
For details about paper capacity of
the bypass tray, see
A
Open the bypass tray.
B
Push up the paper guide release
lever.
1: Paper guide release lever
C
Lightly insert the copy paper face
down and adjust the paper guide.
Metric
version
A3L, A4L, A5L, 8"
×
13"L
Inch
version
11"
×
17"L, 8
1
/
2
"
×
14"L,
8"
×
13"L, 8
1
/
2
"
×
11"L,
5
1
/
2
"
×
8
1
/
2
" L
Metric
version
• Vertical: 90 – 305mm
• Horizontal: 148 –
432mm
Inch
version
• Vertical: 3.5" – 12"
• Horizontal: 6.0" – 17.0"