Changing the paper size, P.103, P.103 “changing the paper size – Ricoh 270 User Manual
Page 115: P.103 “changing the paper, Size, P.103 “changing the pa, Per size, 3changing the paper size
Changing the Paper Size
103
3
Changing the Paper Size
Preparation
Two procedures for changing the
paper size are given below. The
first is for changing the paper size
in tray 1 or the optional paper ta-
ble, the second for changing the
paper size in tray 2. Please check
you are following the appropriate
procedure before you start.
Important
❒ Be sure to select the paper size
with the user tools. Otherwise,
misfeeds might occur.
❒ If you want to change the Large
Capacity Tray's paper size, contact
your service representative.
Reference
For paper sizes, weight, and capac-
ity that can be set in each tray, see
Changing the Paper Size in
Tray 1 or the Optional Paper
Table
A
Make sure that the paper tray is
not being used.
B
Pull out the paper tray.
Note
❒ Remove any remaining copy
paper.
C
While pressing the release lever,
adjust the back fence.
D
Release the side lever.
E
While pressing the release lever,
adjust the side fences.