500 sheets, 100 sheets – Ricoh 270 User Manual
Page 33
Copy Paper
21
1
*1
Paper weight: 20 lb, 64g/m
2
*2
When you set non-standard size paper in the bypass tray, you have to specify the
size. See
P.41 “Copying from the Bypass Tray”.
*3
8K(Ba-Kai) = 267
×
390 mm, 10.6"
×
15.4"
*4
16K(Shi-Lui-Kai) = 195
×
267 mm, 7.7"
×
10.6"
*5
Do not stack copy paper above the Tray 2 lower limit mark. See
.
*6
Always set one sheet at a time. See
P.41 “Copying from the Bypass Tray”.
Important
❒ If you use damp or curled paper, a misfeed might occur. In such a case, try
turning over the paper stack in the paper tray. If there is no improvement,
change to copy paper with less curl.
Note
❒ When you use the bypass tray, it is recommended to set the copy paper direc-
tion to L.
❒ When you use the color paper, set it in the tray 2. Do not stack the paper above
the lower limit mark of the tray 2.
❒ Postcards should be fed from the bypass tray.
❒ If you load paper of the same size and in the same direction in two or more
trays, the machine automatically shifts to another tray when the tray in use
runs out of paper. This function is called Auto Tray Switch. (If you put recy-
cled paper in paper trays using the Special Paper Indicate menu, this function
is not available with these trays unless their settings are identical.) This saves
interrupting a copy run to replenish paper even when you make a large num-
ber of copies. You can cancel this setting. See “13. Auto Tray Switch” and “14.
Special Pap. Indict” of the System Settings.
Reference
If you want to add paper, see
If you want to change the paper size, see
P.103 “Changing the Paper Size”.
Large capacity
tray
(option)
A4K
8
1
/
2
"
×
11"K
60 – 105g/
m
2
, 16 – 28
lb
2,000 sheets
Metric version
Inch version
Paper
weight
Paper ca-
pacity