Regency P33 SunriseTM P33S-LP4 - Manual (Page 31)

Regency P33 Sunrise TM Gas Fireplace 31
INST
ALLA
TION
INSTALLATION
DC SPARK BOX REPLACEMENT
DC SPARK BOX
BATTERY REPLACEMENT
1) Remove the faceplate by lifting it up off fl ush door.
2) Remove the battery cover from the DC Spark Box.
3) Remove the AA battery and replace with a new one.
Diagram 1
DC Spark Box
Diagram 4
Wire Locations
Diagram 5
Diagram 2
5) Reinstall battery cover on DC Spark Box.
6) Reinstall faceplate (refer to steps 5 and 6 of Faceplate installation
P. 38).
1) Shut the power off.
2) Remove the faceplate by lifting it up off fl ush door.
3) Remove the screw securing the control assembly plate to the left
side of fi re box (Diagram 1).
4) Disconnect the 2 DC spark generator wires from the DC Spark box
from location shown in Diagram 4.
5) Remove the 2 Phillips screws securing DC Spark Box to control panel
assembly. (Diagram 5)
6) Replace DC Spark Box and reverse steps.